The Sony Ericsson Xperia X10 mini pro is an Android smartphone with a dinky 2.6in screen and a slide-out keyboard. Running version 1.6 of Android, it's a little outdated, although it's been heavily customised with Sony Ericsson's Timescape interface to make the most of the limited screen space, plus Sony Ericsson has promised an update to Android 2.1 at some point this year. Despite its small size, it's powered by a 600MHz processor and comes with WiFi, Bluetooth, GPS and a 5-megapixel snapper with an LED flash.
After update sony ericsson x10 mini to gingerbread 2.3.7,then anroid logo comes in flashing lights.Than the android logo stops flashing and freezes. And nothing happens than next move. I waited (12 hours) so long but still the same. How much should i wait for that logo screen to boot up my phoneplease help
Hello Erik, I'm having another problem,I put a 2.3.7 rom in my xperia x10 mini pro, and i'm having a little problem sending large text to my gf. I only can send few words in a message.If I send a very large message, the messages doens't send. I try to look on the internet about this problem, but i just found nothing. Can you help pls
hi sir, actually i'm not sure what to do and as well as how to do this... i want to change the os of my x10 mini pro via my laptop for this i need a flashtool and i already have it, and then i downloaded the CM 7, and now when i was going to download the rom's and kernel there it was MINI CM now what the hell that is i mean i already downloaded one os for my mob( 83 mb ) nd that minicm i 138 mb now what i dont know that where to put all those files please help me. thanks......
Hi Gseli, hi kiran tanka,thank you for the feedback! About compatibility with the non-pro, I would recommend you use a rom specifically for that version. You can look at the cyanogenmod for xperia mini: -cyanogenmod-7-for-the-xperia-mini-v7102-24-oct-2011/There is also a whole forum section dedicated to the device at XDA Developers, where you can find more info and custom roms: -developers.com/forumdisplay.phpf=726It could also be a good place to sort out the question regarding where to install it when the SD card is partitioned, because I'm afraid I don't know the answer myself.
hi Erik,i rooted my xperia x10 mini pro,then installed busybox.But when try to install xRecovery, in its home screen \"install xrecovery\" button is showing.when clicked on it, nothing happening after that.pls help....
This is a collation of Sony Xperia Stock Firmware file for your all Sony Xperia Smartphone and Tablets with download Sony Xperia Stock Firmware flashing file and download the flashing tools and Sony Xperia PC Companion.
Around the back of the X10 mini pro is the 5-megapixel camera. This offers cut-down features compared to many camera phones (the iPhone 4 excepted, which has no options). Essentially you can choose between auto, macro, twilight and sports. You can also easily enable or disable the LED \"flash\", although this isn't especially effective as is often the case with this type of flash.
Hello,Today I will show you samll, but fast, powerful and free tool from mr the_laser (author of Setool2 box, Setool2 lite, A2 Tool also known as A2 Uploader) - S1 Tool, designed for all Sony Ericsson Xperia phones from QSD8250, MSM7227 and MSM8255 platforms.1. Before you will begin. 1. Make sure, that you have fully charged battery. 50% is absolute minimum.2. Make backup of all data stored in your phone memory, using for example My Phone Explorer program.3. Install the latest Gordon's Gate flash driver: ggsetup-18.104.22.168.exe 3.58MB 2464 downloads4. Download S1Tool: s1tool.7z 1.54MB 1435 downloads
Using S1Tool you can fast and easly reflash your Xperia smartphone. Supported phones and chipsets:QSD8250: Xperia X10i, Xperia X10a, Xperia SO-01B.MSM7227: W8 E16, Xperia X8 E15, Xperia X10, Xperia X10 mini E10, Xperia X10 mini pro U20.MSM8255: active ST17, arc LT15, arc S LT18, mini ST15, mini pro SK17, neo MT15, neo V mt11, PLAY r800, pro MK16, ray ST18, Live with Walkman WT19S1Tool supports both versions of firmware files. The first ones for flashtool with extension .ftf and original Sony Ericsson flash files for Setool2 with extension .sin_file_set. Firmware for Setool2 contains two parts: APP SW and FSP, so you must choose both files to reflash your smartphone.Procedure is very simple:1. Run s1tool.exe and press FLASH button.2. Choose .ftf firmware or both Setool2 APPSW and FSP files. Hold ctrl on your keyboard to select more than one firmware package.3. Connect turned off phone holding back or volume down button.
If you are getting error during flash using .ftf file, there is a simply solution for that. Of course you can use flashtool, but also you can convert .ftf file to .sin_file_set files. There is a simply way to do that:
Attention: If you do not want to loose user data after flash, you can open fsp firmware using winrar, delete from it userdataXXXXXXXXXXXXXXX.sin file and reflash your smartphone using procedure described above. If you want to downgrade your firmware for example from Android 4.0.4 Ice Cream Sandwich to 2.3.4 Gingerbread - I do not recommend to use that solution, because your phone will not be working properly. In that case reflash phone using original full APPSW and FSP files.4. Relock bootloader. If you have unlocked bootloader and want to relock it, press RESTORE button and connect turned off phone holding back or volume down button. If you are not sure if your bootloader is ulocked or not or you have no idea what bootloader is - do not touch that button.I wish you a pleasant flashing of your Xperia phones and remember - everything you are doing on your own responsibility. If something gone wrong or you are still not sure how to flash your Xperia smartphone, you can choose our Online Service and your phone will be flashed or repaired with setool2 box. You can contact me using Skype chat: gen.jurij or private message.Best Regards,Jurij
Hello,Today I will show you samll, but fast, powerful and free tool from mr the_laser (author of Setool2 box, Setool2 lite, A2 Tool also known as A2 Uploader) - S1 Tool, designed for all Sony Ericsson Xperia phones from QSD8250, MSM7227 and MSM8255 platforms.1. Before you will begin. 1. Make sure, that you have fully charged battery. 50% is absolute minimum.2. Make backup of all data stored in your phone memory, using for example My Phone Explorer program.3. Install the latest Gordon's Gate flash driver:4. Download S1Tool: 153554b96e