So there you have it! If you are stuck at the Garrisons Electrical Station puzzle in Dying Light 2, you'll be pleased to know there is a solution, and it's as simple as connecting a series of generators.
It's time to repower all three generators. Walk to the generator that was working before, and flip over the cable you just put in. Walk over to the generator that was broken, and repeat the process. Walk out of the building and find a platform with the three flashing generators.
When you are done, turn around and drop once more on the ground, then grab the platform that leads to the next generator. This generator is going to be your final goal, and it is protected by a horde of Viotial enemies. Defeat all of the Viotial enemies, and the generator will be ready for repowering. The generator will flash and your task is complete.
Although the quest is simple, there are a few things that can go wrong. Players will need to repower three generators in order to complete the quest, and if the generators are not working, the quest can't be completed. Players will also have to be fast as the generators won't be generating their power forever, so players will need to act fast.
Once you have made it to the top, you'll need to ride a cable to the last generator. You will be transported to a very long grapple hook that will let you climb to the top of the building. There will be a line of cable on the top of the building, and you will need to climb to the platform of that final generator. The generator will not be active, so you'll need to wait until the generator is working to complete the quest.
In the SLM process, heat treatment is generally done in order to prevent the possible damage to the build materials. Moreover, the SLM process involves a low melting temperature (e.g., ~100°C), which makes the process very sensitive to temperature variations. Therefore, it is critical to know the factors that determine the mechanical properties of SLM parts and heat treatment on the mechanical properties. In fact, the heat treatment has been one of the most critical steps in every manufacturing process. According to recent studies on hot-work and SLM NiTi alloys, heat treatment of NiTi alloys has a significant effect on the transformation behaviour and the shape recovery properties [42,43,44]. In this study, heat treatment has been found to be an effective method for enhancing the transformation strain and shape recovery percentage. This could be well explained by the physical metallurgy and the microstructure theory. 827ec27edc